Contacts
Address
USA, California, Norwalk, 90650-5248, 13455 Pumice St
Director
Cosby M Newsom, Owner
Phones of enterprise
management
+1
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Bondline Products, Company
Products - rubber and miscellaneous plastics. Rubber and plastics hose and beltings
In stock
Die Cast Aluminum Body Brass Treaded Insert, 1/4 In. NPT, Non-Galling Large Center Hole, .375 In. Dia. Solid Steel Pin Gasket, 'Clave-Grade Elastomer Base Dia. 2.5 In.
Recent Re-Design: provides a Die-Cast rectangle
which permits use of a 9/16 In. or 7/8 In. wrench, instead...
Group: Industrial products
In stock
For de-bulk and cure cycle to 400°F. , Est. Service Life, 200 autoclave cure cycles plus de-bulk cycles. Amortized cost to de-bulk and vacuum bag per cure. Estimated RVB* bagging time 10 Min. for each de-bulk or cure cycle.
Group: Industrial products
In stock
When the tool has a suitable area all around for installing seal rib and frame.
Frame is clamped to tool so the apex of Seal Rib contacts Diaphragm all around, and vacuum is drawn between
Diaphragm and tool surface within the continuous loop of Seal Rib.
Group: Special equipment for producing
In stock
PSI on Seal Rib multiplies at the linear point of contact between Seal Rib and edges of
peripheral groove. Intumescent Keyhole Seal Rib expands when heated and seals within the groove.
ADVANTAGES: AUTO-VAC
Peripheral vacuum ducting around tool.
No bulky frame required.
No...
Group: Industrial equipment
In stock
STRUX® is a positive tool sealing system used to stop leaks in
composite/metalbond tooling used for curing parts in autoclaves or ovens to 400 Deg F.
Physical Data
Color:
Light Gray
Solids:
70%
Thinner:
VMP...
Group: Details and units of machines
In stock
Autoclave pressures obtainable with oven cure. Wrinkles Eliminated as inflatable forces layup to OML forming smooth inner/outer part surface.
AND
If pressure/vacuum fitting is vented to autoclave and vacuum bagging is applied across the split lines of the mold and sealed...
Group: Details and units of machines
